How To Repair Cooler Wheel

Download Commodity

Download Article

These days, many manufacturers sell bicycle kits that can exist attached to pop cooler brands to brand them a breeze to tote from place to place. To install wheels on your cooler, commencement decide which type you'd prefer—a single axle arrangement or carriage-way flatbed cart. The quondam tin can exist attached to the libation'south necktie down slots in a affair of seconds, while the latter supports the libation from underneath, and tin can exist with fastened with straps for added security.

1. 1

   Weave the strap through the bracket of the wheel base. Guide the long strap included with the bike kit through one of the holes on the forepart side of the bracket, then out through the adjacent hole. Pull the strap until both ends are aligned and stretch it out to its full length.

   • Brand sure at that place are no twists, folds, or snags in the strap.

2. 2

   Thread the strap through the cam buckle. You'll find the pocket-sized metallic or plastic buckle at the far end of the long strap. Feed the loose finish of the strap into the pinnacle of the buckle, and so around and out the bottom. Requite information technology a quick tug to check that it'south secure. If it'southward not, it may accidentally sideslip out while you're pulling the libation.

   • Most cam buckles can be released with the press of a button. This will make it like shooting fish in a barrel to quickly remove the attachable wheel system as needed.

   Ad

3. 3

   Fix the libation on top of the long strap. The libation should be situated between the cycle base of operations on 1 side and the handle piece on the other. Slide the cooler until it sits flush against the wheel bracket. Adjust the positioning of the bracket to center it as much as possible.

   • Arrange the bike base so that the bracket is lying flat confronting the ground beneath the wheels.
   • There should be 3–4 inches (vii.half-dozen–10.ii cm) between the bottom of the cooler and wheel axle.

4. 4

   Pull the strap down through the integrated tie down slot. Insert the loose end of the strap from the outside. In one case the strap is looped around the tie down slot, pull it down sharply to cinch it and bring it closer to the axle.^[1]

   • The straps on some wheel kits may characteristic a divide tie down insert piece. These tin can simply be fitted through the tie downward slot so there'due south no need to thread the strap itself.

5. 5

   Adhere the handle slice. Press the handle bracket up into the molded border of the cooler on the underside of the opposite tie down slot to fit it into place. Feed the clip or carabiner string down through the slot, then connect it to the looped end of the long strap emerging from the bottom of the libation.^[ii]

   • On coolers with rope handles, it may be necessary to pull down on the knots in society to create enough slack to brand room for the handle cord.
   • Yous might also be able to attach the clip to the cooler itself, if your model features built-in straps.

   Advertisement

1. i

   Ready the cooler on the cart. Make certain the cooler is sitting flat and is properly centered on the bed. The edges of the cooler should line upwards with the lip of the bed, with no gaps or overlap. You may need to ask someone to help you lift the cooler if it's already full.

   • Many flatbed carts are sturdy enough to back up up to 400 pounds (180 kg), which ways you can load upward your most spacious libation without worrying nigh how to send it.
   • If y'all're working with a more meaty cooler, position it and so that it sits closer to the handle side of the cart to get in easier to pull.

2. 2

   Extend the bed to accommodate larger coolers. Some newer carts feature configurable beds that are designed to hold objects up to 38 inches (97 cm) in size. When yous need a little extra room, only compression the clips at the appropriate stop and pull the ii halves of the wheel base apart until they're the desired length. This volition make it possible to booty iceboxes of all shapes and sizes.^[3]

   • Avoid loading your cart with a cooler that'south bigger than the maximum dimensions of the cycle base.

3. 3

   Install end rails to keep the cooler from shifting. If your flatbed cart came with detachable end rails or gates, you lot can put them in place by inserting the bottom pegs into the respective holes on either end of the bed. When you're fix to unload the cooler, removing the rails is equally easy as sliding them back out.^[4]

   • Some carts fifty-fifty come with hitching units for linking multiple carts, which may be useful if y'all're bringing along several coolers for a camping trip or week long music festival.

4. 4

   Strap the libation down for added security. The simplest way to do this is to feed a strap or bungee string underneath the bed, and then pull both ends together at the summit of the cooler. If the straps you're working with are peculiarly long, you may demand to wrap them around more than once in order to hold the cooler in place.

   • If you really desire to make sure your cooler doesn't budge, consider using a pair of straps or cords.
   • Ratchet straps can come in handy for locking down big coolers, as they can exist tightened piffling by little until there's no slack remaining.

   Advertizing

1. 1

   Pry out the stock axle. Set up the libation on its terminate so that the wheels are pointing up towards yous. Hold the cooler steady with one hand and pull up on the quondam axle from beneath with the other. Information technology should pop right out with enough force.^[5]

   • Brace yourself against the trunk of the cooler with 1 articulatio genus to give yourself more leverage.
   • Unmarried axle all-terrain wheel systems are an like shooting fish in a barrel manner to upgrade older plastic coolers that already came equipped with wheels.

2. 2

   Remove the wheel from one stop of the new beam. Use the included hex wrench to loosen the screw connecting the bike to the axle. Slide the wheel off and set it aside. If there's a carve up washer or bushing alongside the wheel, be certain to remove it besides.^[six]

   • Be careful not to lose the pocket-sized screw while you're taking off the cycle.

3. 3

   Slide the axle into the groove on the underside of the cooler. Line upward the end of the beam with the opening on ane side of the cooler and guide it through. Jiggle the axle to make sure it doesn't move around too freely inside the groove. If information technology does, it may be time to throw the cooler out and buy a new one.^[seven]

   • All-terrain wheel conversion kits are virtually often designed to fit coolers with a capacity of at least 60 gallons (230 L).

4. 4

   Put the new wheel back on the axle. Fit the washer or bushing over the terminate of the axle, then slide the bike on and tighten the screw property it in place. Y'all'll now be able to haul your libation over asphalt, grass, sand, gravel, or whatever surface stands between you and adventure.^[8]

   • The wider diameter of the all-terrain wheels volition cause your cooler to sit a little higher when propped up, making it easier to pull.

   Advertisement

Enquire a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Advert

• Both attachable single axle wheel systems and flatbed cards are compatible with nigh popular cooler brands, including Yeti, Igloo, and Pelican.

• Ballooning rubber wheels are best suited for traversing sand and other loose, shifting surfaces.

Thanks for submitting a tip for review!

Advertisement

Things You'll Demand

• Attachable single axle cooler wheel system
• Flatbed cart
• All-terrain cooler wheel conversion kit
• Hex wrench
• Ratchet straps or bungee cords (optional)

About This Commodity

Thanks to all authors for creating a page that has been read 17,457 times.

Did this commodity help yous?

Source: https://www.wikihow.com/Put-Wheels-on-a-Cooler

Posted by: garciaestre1969.blogspot.com

Share this post